Garmin fenix 3 battery replacement

Your message was sent.

If the battery is not holding a charge as long as it should, or is failing to charge at all, use this guide to replace the battery. You will need a T6 Torx screwdriver, a T5 Torx screwdriver, and a spudger. Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon. Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard. Use a T5 screwdriver to remove the two silver 1. To avoid losing or dropping the screws once they are loose, use tweezers to extract them.

Garmin fenix 3 battery replacement

This guide will give you step-by-step instructions on how to quickly swap out that old battery for a new one. Use a plastic opening tool to remove the face of the device to expose the inner components. There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well. Another ribbon is attached to the top of the motherboard. Disconnect this ribbon. The battery is glued to the motherboard and will need pried off using the nylon spudger. Cancel: I did not complete this guide. Badges: Fernando Alcaraz - Nov 8, Reply. Erik E - Jan 4,

Load more comments.

.

If the battery is not holding a charge as long as it should, or is failing to charge at all, use this guide to replace the battery. You will need a T6 Torx screwdriver, a T5 Torx screwdriver, and a spudger. Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon. Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard. Use a T5 screwdriver to remove the two silver 1. To avoid losing or dropping the screws once they are loose, use tweezers to extract them. Lift the watch and turn it over one hand.

Garmin fenix 3 battery replacement

This guide will give you step-by-step instructions on how to quickly swap out that old battery for a new one. Use a plastic opening tool to remove the face of the device to expose the inner components. There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well. Another ribbon is attached to the top of the motherboard. Disconnect this ribbon. The battery is glued to the motherboard and will need pried off using the nylon spudger. Cancel: I did not complete this guide. Badges:

London htr departures

Amazon or other 3 Party Sellerie use google for search the are tonns of Shops wich sell it. Disconnect this ribbon. Replaces the following products Garmin Load more comments. Worked perfectly! Your message was sent. What you need. The battery is glued to the motherboard and will need pried off using the nylon spudger. Add Comment. Fernando Alcaraz - Nov 8, Reply. Original language: spanish.

Garmin Fenix 5 is one of the robust smart watches.

Single Step Full Guide. Look closely to make sure no part of the connector is sticking up, even a hair or it will not work. Double-sided carpet tape or something similar will help. Step 4. Disconnect this ribbon. To reassemble your device, follow these instructions in reverse order. Author with 2 other contributors. Author with 7 other contributors. Step 7. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon. Step 5.